Event details
Whatever job you are working on, it is vital to choose the right die – flexible or solid – for the application, helping to optimise press performance, increase output, and maximise uptime.
Every job has its challenges, with thin films and abrasive materials being particularly demanding for die-cutting processes and equipment. There is also the constant and exacting challenge of dealing efficiently with the waste material from the die-cutting operation.
Join FlexoTech and Maxcess/RotoMetrics for an exclusive webinar that will give printers and converters the solutions to these dilemmas, drawing on expert insight from Maxcess and its customers.
The webinar will provide answers to the following problems:
- Facing challenges when converting thin film (typically 23-30 µ PET liner)
- Experiencing short life on rotary tooling when converting abrasive materials – (e.g. direct thermal, opaque white and glass bead materials)
- Needing waste management solutions to remove slugs and slots – learn the pros and cons between vacuum, air and pin-ejection waste systems
Presenters
Andy Knaggs
Editor
FlexoTech
He graduated from Bournemouth University with a degree in Multi-Media Journalism, prior to which Andy had a ten-year career in banking with HSBC.
Thomas Eberhardt
Sales director EMEA
RotoMetrics
- Solid die specialist and generalist within the converting industry for more than 20 years
Neil Lilly
Regional sales director UK and Ireland
RotoMetrics
- Worked in the converting industry for 30+ years
- Intimate with UK’s converters and their needs
Dean Morris
European technical service manager
RotoMetrics
- Technical rotary tooling wizard with 30+ years converting experience
- Probably UK’s most knowledgeable person within the converting industry
- Live and breathe for solving challenges relating to rotary tooling, like thin film applications and waste reduction